Change Door Sets to Reflect Your Style

通过 September 23,2016 威廉希尔wff No Comments
Changing the door sets on the doors in your home can make a beautiful design statement and is a reflection on the overall style of the home. Interior door setscome in three basic functions – privacy,passage,和假。
An old door open with an ornate door knob.
Privacy door setscan be locked from the inside and locked from the outside by emergency key and are used primarily in bedrooms and williamhillbathrooms.
Passage doors setsare operational from both sides and have no locking function.他们是用于壁橱和走廊的门。
Dummy doors setshave no mechanical latch mechanism.They are typically flush mounted with no mortise or hole cut in the door,but can be mounted on doors with predrilled holes.They are often used for closets,pantries,on interior double doors,and for decorative applications.
Door sets come in a wide array of styles and finishes from rustic to contemporary and simple to ornate.Door knob choices include lever,round,oval,octagonal,Prairie,New York,Victoriadoor-knob4n,Mission,Arts and Craft,Art Deco,和更多。Backplates also are available in many styles and shapes.
Entry door sets lock from both sides using a key on the outside and a thumbturn on the inside.Locking entry doors all work basically the same way.
If you are changing out the knob and lock to a similar style,it is a fairly simple installation with minimal (if any) cutting needed.

Here are the steps for changing a standard locking door set.

1 – Remove the interior knob by unscrewing the two screws on either sInstall the door handle with a lock Carpenter tighten the screw using an electric drill screwdriver close-up.ide of the back plate using a screwdriver.
2 – Gently pull the two knobs apart.
3 – Remove the latch plate on the edge of the door by removing the two screws that hold it in place.Remove the plate and the lock assembling by pulling it straight out.If it is stuck,put your screwdriver behind the latch and holding each side pull the screwdriver towards you.
4 – Check the new strike plate for fit.If needed,use a chisel to remove wood so the plate lays flush.

Installation locked interior door knobs close-up woodworker hands install lock.

5 – Making sure the keyed side is to the outside,通过孔插入新锁具。
6 – Place the knob assembly through the door carefully aligning the shafts.
7 -测试锁操作锁定,解锁门在安装螺丝之前。
8 -安装背面板上的螺丝小心不带螺丝收紧了。
If the door has a deadbolt,it is replaced just as the knob was replaced.盘子在大多数门栓主要涵盖与艾伦扳手必须清除。
mm

About Larry Padgett

Larry is an award-winning journalist and photo journalist with over 35 years of experience.He has written for a number of industries including healthcare,die casting,建设,home restoration,sports,教育,and religion.He is a copywriter and blogger for williamhillwffVan Dyke's Restorers.

Leave a Reply